Mac mini 2012 server ssd

What's more, minis from onward are specifically designed for two SATA drives; the Mac mini Server configurations are essentially the same as the corresponding Mac minis, but they already have an extra drive installed in the second bay. In later generations, the hard drive can be paired with an SSD to create a Fusion drive, which can be formatted with Disk Utility.

And that's where things get complicated In most "roll your own Fusion drive" installations for machines that Apple did not originally spec with Fusion that is, all machines except iMacs and minis , the DIY-er must install the SSD into the first bay the one where the hard drive was originally installed and transfer the HD to the second spare or optical bay, in order to get the Fusion drive to format correctly.

If a Fusion drive is part of your plan for this upgrade, it's probably wise to follow the accepted practice and move the stock HD to the second, empty bay. If you know for sure that you don't want to go to Fusion, then you can put each drive wherever you want. If you change your mind later on, you may have to open up the machine and rotate the drives first.

Creating a Fusion drive is a more complicated discussion, for which you should probably start a new question. As for the cable: If you were using generic cables, it probably wouldn't make any difference which cable connected to which drive. In this case, it probably does - not because the cable included in the iFixit Dual Drive Kit carries data any differently, but because the size limitations of the mini enclosure mean that the cable is shaped a certain way to reach exactly from the socket on the logic board to the drive mounted in the second bay, and no farther.

I think the logical thing to do is to use the original SATA cable to connect to whichever drive is in the first original HD bay, and the iFixit cable to connect to whichever drive is in the second originally empty bay. Safety first. Select a Language: Is there a version number of the Disk Utility app we can just check to know if it is the version that will try and repair a new install thinking the two drives are one fusion drive? Once opened you will be able to see what OS you are currently running!

If you have any further questions, please contact our Technical Support Team! I installed the two-drive upgrade without any major issue. It was not a quick job by any means but OK if you have the right tools and are patient. One note — a couple of the screws labeled as T-8 are actually T-9 the ones attaching the drive to the antenna grate. No drama. Then I migrated my data from the backup copy. So I reconfigured the drives, eliminating the Fusion lvg and reformatting as two separate drives. This is now working very nicely.

I looked at the installation videos. The videos are great though because it shows exactly how the sequence proceeds. For the Mini, the SSD is a standard format 2.

Introduction

Later models are different, but the is an easy upgrade. All the cables and screws are already there.

OWC Mercury Electra 6G

You just need to move them from the old drives to the new ones. Earlier models, such as Mini, had some but these are external and can be transferred. You can peel these off by gently lifting on the sides and then reapply to the new drives. For the Mini, the temperature sensors are attached to these plastic sheets. For the there are no sensors. This is easier if you tip the mini onto its front face the one opposite all the connectors so that the drive goes in vertically.

Slip a business card underneath it when you re-seat the motherboard — this will help get the screws from the antenna grate to go in properly. But you still need to pull the motherboard out a bit to get clearance for the drive to come out. I placed the new drives in the same configuration. I finally solved it by switching the 2 drives position, and voila it works amazingly.

I hope this helps someone! OS X I guess that the new system will be a Fusion drive, but either way is fine from my viewpoint. If I understand the very helpful comments and suggestions correctly, I should install the SSD in the upper slot deepest into the Mini, working from the bottom and the HDD closer to the antenna grate.

Or are the existing items suitable? Is anything else needed? Is it better if I format the two drives first? Or should I not do that?

Mac Mini (Late ) Upgrades. SSD or Data Doubler. | MacRumors Forums

Depending on where the original drive is located will determine what kit you will need. When you have installed both drives into your MacMini, you will need to manually create the new fusion. Follow-up answer to my earlier question. Data Doubler is NOT required. This worked for me because I have lots of music and put all that on HDD.

Everything else is on SSD. Curious if anyone has tried doing a fusion drive? I am guessing that most of us would prefer to know what is where rather than letting OSX manage things? Trying to decide what to do with it all.

Apple Mac mini Server (Late 2012)

No data of any value as this is just an htpc. It was a nightmare trying to do a clean install or an internet restore. Ended up doing a restore from the main drive as this was the only thing that worked. The boot up process was a fast as advertised. But after 10 minutes of using it and opening several apps noticed that the system became very slow, unreliable and the multicolor ball of doom started to appear a lot, taking longer than usual for an app to open. Read a lot on the internet about similar problems, but nothing sims to fit what I am experimenting with my mini.

The SSD firmware is up to date. Repair permissions. How much memory is installed, is it all recognized in system report? Run a disk speed test many free ones in internet Does system report see the MercuryPro at 6GB link speed? Mini i5 with Yosemite and 16 megs of memory. Did all you mentioned several times. But every time the same thing happen. Boot up fast, start working fine, but after several apps openings and between 10 and 20 minutes the ball of doom appears taking more than usual to open, close or move between apps.

Do a shut down, restart and the same thing happen. After enabling it all the problems were solved. Now I get all the speed of the SSD without the ball of doom appearing every time and slowing all apps. Maybe this will help other with the same problems. Is it necessary to upgrade that to Mavericks, or may Question 1 is answered. Thanks in advance. But in reality it will only recreated if you format the drive, then install to it.

If you are looking to run the drives individually and you have successfully installed and formatted the new SSD, all you will need to do is upgrade directly to Yosemite. You do not have to upgrade form X to All data is stored on the HDD. Do I need to change any settings in TM, e. Currently, I turned TM off.

Installing ssd in lower bay or upper bay?

Time Machine, by default, backs up all the drives on the computer. You can find the current version of the instructions to do so from Apple here. Restart your computer and boot to the internal hard drive like normal. Once the drive is formatted and shows in the Finder, you can then shut down. Follow the prompts to install. The actual downloading and installation process may take a while. After the OS is installed, follow the prompts to set up your computer. When asked, choose the option to import your data from another drive and select your original drive as the source. Once the migration is complete, your computer should boot to your SSD.

If you have any further questions please contact OWC!

How to Upgrade/Replace the Main Drive in a 2012 Mac mini

The HDD has In the Important Note, there appears to be an action that needs to be taken between Internet Restore Method step 8 and step 9. The installation process will take some time. To answer your first question, please format the drive before booting to the Recovery Partition. Though unnumbered, this is steps in the first set of instructions at the start of this blog post.

Not a Fusion drive. This setup was working flawlessly since I installed it. Until I rebooted the other day and wham! I did a standard restart. No buttons being held during the process. Fortunately, I was able to Target disk mode to both internal drives and backup. What would cause this after years of perfect use and nothing different happening? This may have been caused by a corruption in the Operating System OS. I would recommend doing a fresh install of the OS.


  1. como grabar fotos en cd mac.
  2. how to refresh page on mac.
  3. Add your answer.

If you have any further issues with it, please feel free to contact our technical support team. One of my helpers offered to finish formatting the new SSD. By accident he did. Any suggestions? A Fusion drive will show up as a single volume. When looking in Disk Utility you will only be able to see the single volume and the name that was provided to it.

You will then be able to see every SATA drive in your computer independently. If you are still not able to find the SSD or confirm the Fusion was set up correctly, please feel free to contact our Technical support team! My goal is to have the original So my question is: This is very much possible. Once you install the new SSD, you will want to boot your computer as you normally would. You will then be able to go into disk utility and format the new SSD.

Once the new SSD has been formatted you will be able to proceed with the fresh install of Once both drives have operating systems on them, you will be able to choose what drive you would like to boot up off of and use. Please take a look at this Apple document for instructions on how to use and set this up. Add Comment. Step 2. Step 3 Fan. Step 4. Step 5. Step 6 Cowling. Step 7. Step 8 Antenna Plate.

Step 9.

Helpful answers

Step Step 12 Hard Drive. Step 18 Hard Drive Cable. Step 19 SSD Installation. Almost done! Follow these instructions in reverse order to reassemble your device.